• India has set ambitious targets for renewable energy and reducing greenhouse gas emissions from the power sector, and the Biomass Co-firing Policy is a critical step towards achieving these goals.
• However, the policy has not yet been widely accepted, despite the fact that using biomass is still a cheaper option than importing coal and offers an economically viable alternative for all thermal power plants.
• The slow progress of State Generating Companies and Electricity Regulatory Commissions in using biomass in their power plants has prompted the Ministry of Power to consider suitable provisions that will encourage thermal power plants to use biomass along with coal as fuel.
• The Revised Biomass Co-firing Policy of the Ministry of Power in 2021, is expected to have a significant impact on various sectors such as power, coal, agriculture, Micro, Small and Medium Enterprises (MSME) and the environment.
• So, the issues with the India''s biomass co-firing policy needs to be addressed to achieve the ambitious targets for renewable energy.

Biomass Co-firing

• Biomass co-firing is the practice of substituting a part of the fuel with biomass at coal thermal plants.
  • Coal and biomass are combusted together in boilers that have been designed to burn coal. For this purpose, the existing coal power plant has to be partly reconstructed and retrofitted.
  • Co-firing is an option to convert biomass to electricity, in an efficient and clean way, and to reduce GHG (Green house Gases) emissionsof the power plant.
• Biomass co-firing is a globally accepted cost-effective method for decarbonisinga coal fleets.
• India is a country where biomass is usually burnt on the field which reflects apathy towards resolving the problem of clean coal using a very simple solution that is readily available.

Significance

• Biomass co-firing is an effective way to curb emissions from open burning of crop residue, it also decarbonised the process of electricity generation using coal.
  • Substituting 5-7 % of coal with biomass in coal-based power plants can save 38 million tonnes of carbon dioxide emissions.
• It can help cut emissions from combustion of fossil fuels, address India’s burgeoning problem of farm stubble burningto some extent, reduce waste burden while also creating jobs in rural areas.
• India has large biomass availability as well as rapid growth in coal-fired capacity.

Challenges related to the Biomass Co-firing

• Availability:
  • The availability and quality of biomass vary across regions in India.
  • Whilesome regions have an abundance of biomass, others face a shortage.
  • Moreover, the quality of biomass also varies, which can affect its combustion efficiency and emissions.
    • Biomass pellets are difficult to store at plant locations for extended periods of timebecause they quickly collect moisture from the air, making them unusable for co-firing.
    • Only pellets with a moisture content of less than 13-14% typicallycan be burned alongside coal.
  • Infrastructure and Logistics:
    • The transport and storage of biomass can be challenging, especially in areas where infrastructure is inadequate. This requires specialised equipment and facilities, which can increase the cost of biomass co-firing.
    • Also, Biomass co-firing requires specialised equipment,such as biomass grinders, conveyors, and storage systems.
    • Additionally, power plants need to be retrofitted to enable biomass co-firing.
  • Combustion Characteristics:
    • Biomass has different combustion characteristics than fossil fuels, which can create challenges for power plant operators.
    • For example,biomass may have higher moisture content, lower energy density, and higher ash content than coal, which can impact combustion efficiency and emissions.
  • Emissions:
    • Co-firing can reduce emissions of greenhouse gases and other pollutants,but it can also introduce new emissions challenges.
    • For example, biomass combustion can produce emissions of particulate matter, nitrogen oxides, and sulfur dioxide, which can impact air quality and human health.
  • Cost:
    • Biomass co-firing can be more expensive than traditional fossil fuel-based power generation,especially if significant modifications to the power plant are required.
    • This can make it challenging for biomass co-firing to compete economically with other renewable energy sources such as wind and solar.

Initiatives by the Government

• National Mission on use of Biomass in Coal Based Thermal Power Plants
• Carbon Capture and Storage
• Coal Beneficiation

Looking Forward

• Ensuring a Steady Supply of Biomass to Power Plants:
  • Steady supply of biomass to power plantscan be ensured by developing a reliable supply chain that can transport biomass from source to plant.
    • This could involve partnering with farmers, forestry companies, or other biomass suppliersto secure a steady supply of biomass.
  • Another way to ensure a steady supply of biomass is to focus on surplus biomass,which is biomass that is not being used for other purposes.
    • This could include agricultural residues, such as straw or corn stover, or forestry residues, such as branches or sawdust.
  • By using surplus biomass, we can avoid competing with other uses of biomass,such as food production or the manufacture of paper products.
• Building Infrastructure and Logistics:
  • Developing the necessary infrastructure and logistics to transport, store, and process biomass is critical to the success of biomass co-firing.
  • This couldinvolve building new storage facilities, upgrading transportation networks, or investing in new processing technologies.
• Robust Regulatory Framework:
  • The Biomass Co-firing Policy needs to be backed by a strong policy and regulatory frameworkthat provides incentives and support for biomass co-firing.
  • Also, there needs to be a clear, competitive market for biomassto make sure that prices and distribution are fair.
• Developing and Deploying the Necessary Technology and Equipment:
  • Developing and deploying technology and equipment is crucial for the success of biomass co-firing.
  • This includes developing specialized boilers, burners, and control systems that can handle the unique characteristics of biomass,as well as retrofitting existing equipment to accommodate biomass co-firing.